Monitoring Particle Counter CLIMET – Trident CI-3100-OPT

Features

. Flow Rate Control: Electronic, automatic closed loop
. Particle Channel Sizes: 2 channels 0.5/5 µm
. Laser Diode: Optimal balance of long life, stability, and resolution for added accuracy
. Cleaning: Compatible with common cleaning and sterilization procedures, including VHP
. Vaccum Source: Power efficient internal vacuum source (OPT models only)
. RH/Temp output: 6-pin connector (compatible with Climet RH/Temp probe)
. Memory: 10.080 samples (7 days of storage), date and time stamped
. Leds Status Indicators: Power, Sample, Alarm, Count, Laser Status, Flow Status, Network FTP, Network Time, Service required and Network Link
. Environmental:
– Operating temperature: 0-37.8°C, 32-100°F,
– Dimensions: 15.56 x 10.16 x 28.26 cm,
– 0-100% relative humidity, non-condensing
.Compliance: ISO 21501-4; ISO 14644-1; EU GMP, Annex 1; and FDA 21 CFR Part 11

Accessories included: zero count filter, product manuel, and external exhaust fitting (on select model).

The Trident particle counter is a 2-channel particle counter used in continuous monitoring applications in a variety of industries – generally Grade A or B (ISO 5) clean zones. Standard particle sizes are 0.5 µm and 5.0 µm.

The CI-3100 has a self-contained power supply and vacuum pump that eliminates the need for an external vacuum source and plumbing, which can be extremely expensive in new installations. Designed for fixed continuous monitoring deployment, the CI-3100 offers a standard flow rate of 1 CFM. Other flow rates may also be available.

In yet another industry first, the Trident Series is the first particle counter with a built-in vacuum pump that operates with Power-over-Ethernet (POE+). This technology injects power and ground onto standard network cabling, thus eliminating the need for wall power. POE+ is a much sought after technology given safety protocols of some of the larger pharmaceutical and biotechnology producers. Alternative configurations also include Wi-Fi with wall power, or standard Ethernet TCP/IP with wall power.

Accessories

. Stainless steel isokinetic probes
. Tubing
. Probe stands
. High pressure diffusers
. Software

Associated services

Customised IQ/OQ protocols developed according to your application.

Training session on site or in our office related to regulation, equipment use and data treatment .

Calibration and metrological services are performed in our laboratory located at Betton (35).