Monitoring Particle Counter CLIMET – CI-3100-SRS

Features

. Flow Rate Control: Critical orifice @ 1.0 cfm
. External Vacuum: 15’’ Hg minimum
. Particle Channel Sizes: 2 channels 0.5/5 µm
. Laser Diode: Optimal balance of long life, stability, and resolution for added accuracy
. Electrical: Power and signal through DIN connector
. Cleaning: Compatible with common cleaning and sterilization procedures, including VHP
. Leds Status Indicators: Power, Count, Laser Status, and Flow Status (Alarm LED only on 4-24 mA models)
. Environmental:
– Operating temperature: 0-36°C, 32-97°F
– Dimensions: 11.4 x 10.2 x 5.1 cm
– 0-90 % relative humidity
– Non-condensing 4.0’’ (W) on RS-485 version
. Compliance: ISO 21501-4; ISO 14644-1; EU GMP; Annex 1; and FDA 21 CFR Part 11

Accessories Available: Mounting brackets, stainless steel isokinetic probes, light blocking isokinetic probes, tubing, probe stands, customized cabling, zero count filters, and other accessories sold separately.

The CI-3100 RS (Remote Sensor) Series is a 2-channel particle counter used in continuous monitoring applications in a variety of industries – generally Grade A or B (ISO 5) clean zones.

The CI-3100 RS requires both an external vacuum pump and DC power. Users have a choice of standard data interface options including RS-485 Modbus, or 4-20 mA outputs.

Alternatively, our CI-3100 OPT and CI-3100 Trident versions contain an internal power supply and vacuum pump eliminating the need of an external air source and vacuum tubing.

Standard particle sizes are 0.5 µm and 5.0 µm, but custom sizes are also available. Designed for fixed continuous monitoring deployment, the CI-3100 RS offers a standard flow rate of 1 CFM, and some models are offered in an alternatively lower 0.1 CFM flow rate.

On/Off functionality is remotely controlled, and additionally, the CI-3100 RS is VHP compatible ensuring easy cleaning and sanitation.

Accessories

. Stainless steel isokinetic probes
. Tubing
. Probe stands
. High pressure diffusers
. Software

Associated services

Customised IQ/OQ protocols developed according to your application.

Training session on site or in our office related to regulation, equipment use and data treatment .

Calibration and metrological services are performed in our laboratory located at Betton (35).